60″ wide colors, 53″ wide chrome, 3.2 Mil cast wrap vinyl with built-in protective clear coat layer with EZ apply/air egress and RS/slideability
No overlaminate required, however, overlaminates have been shown to improve the cleanability of matte colors
Superior conformability over curved surfaces, corrugations and rivets
Easy Apply RS feature allows for faster positioning, bubble free application and long term removability
Outstanding durability and outdoor performance
Gloss colors can sometimes have a haze/blotchiness/mottling that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat.
Black & white have an expected outdoor life of 12 years with limited warranty
Gloss and Matte colors have an expected outdoor life of 10 years with limited warranty
Satin colors (except ColorFlow) have an expected outdoor life of 10 years with limited warranty
Metallic and Pearlescent colors have an expected outdoor life of 5 years with limited warranty
Brushed Metal colors have an expected outdoor life of 4 years with limited warranty
Carbon Fiber colors have an expected outdoor life of 4 years with limited warranty
Avery SW ColorFlow (Shade Shifting) colors have an expected outdoor life of 4 years with limited warranty
Avery Chrome colors have an expected outdoor life of 3 years with limited warranty
Avery Diamond colors have an expected outdoor life of 3 years with limited warranty
2 year outdoor durability horizontal
Clean removability up to 4 years
Colors with an asterisk* may be less than fully opaque and may demonstrate color shift when applied, or allow show through of paint lines or dissimilar colors, or overlap of material
Avery ColorFlow colors are directional in appearance. For best results do not alternate between lengthwise and widthwise panel installation
CAUTION: Metallic, Pearlescent, ColorFlow, Carbon Fiber, Brushed Metal, and Diamond patterns all have a directional characteristic in their appearance. For the best overall appearance, do not alternate between lengthwise and widthwise graphic panels.
Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.
Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll. We are unable to guarantee consistency with multiple orders of cut yardage.
The Avery Dennison warranty is for product value only and provides no protection or reimbursement for additional costs including labor or vehicle/paint damage. Please refer to the Information Sheets below.
3M™ 1080 Vinyl Wrap in Gloss Cinder Spark Red* GP253